Printable version

Loading Laundry

Average rating
1 star 2 star 3 star 4 star 5 star
Rate this
1 star 2 star 3 star 4 star 5 star

Loading a washing machine seems like a pretty straightforward process, and it is, but there are a few things you should keep in mind before you start tossing in armloads of clothes.

First, start your washer and put in the laundry detergent before adding clothes, to allow the detergent to dissolve. This will help avoid the spotting that can occur on clothes when detergent is poured on them directly. Also, wash loads in an order that makes sense to you keeping in mind that heavier things like sweaters and towels will take longer to dry.

When you start putting your clothes in the washing machine be sure to close any zippers to prevent snagging other garments and consider placing more delicate items into mesh laundry bags. Finally, double check that every pocket is empty to avoid finding soggy shreds of facial tissue all over your clothes when you go to dry them.

Finally, don’t overload your washing machine. Without room to separate and move freely your clothes won’t come as clean or rinse as thoroughly. The machine is fully loaded when there’s about one hand’s width of space left between the laundry and the top of the machine.

Featured Videos

How to Load a Top-Loading Washing Machine

Tips & Tricks

Stone cold stains

Many stains are more likely to be removed entirely if soaked in cold water before it has had time to set.

Testing...testing...

If in doubt, test your color garment for colorfastness – apply warm water to an inconspicuous part (inside of the hem, for instance), then press this part with a warm iron between two pieces of white cloth.

On the flip side

To protect your favorite garments, try turning them inside out before washing.

Sort as you go

Use a partitioned laundry basket to sort your laundry as you remove it.

Don’t overdo it

Overloading your washing machine could mean that your clothes don’t properly get clean.

Powder, powder everywhere

White streaks of powder left behind on your clothes due to undissolved detergent are usually caused by overloading your machine, and can be removed with an additional rinse cycle.

Give them some space

Washing much smaller loads on non-cotton cycles to give more freedom of movement in the drum and result in better cleaning.

Dingy whites

Using too little detergent can cause whites to become dingy as there are insufficient ingredients to hold soils in the water so they don’t redeposit on the garments.

Floods of suds

Overdosing in a soft-water area can lead to “oversudsing” which, in extreme cases, can mean suds come out of the machine.

Read your labels

Always check the fabric care label for the manufacturer’s washing recommendations.

Stop the bleeding

Some dyes will bleed even in very cold water, so always sort your washing into light colors, dark colors, whites, and delicates.

Cool and clean

To compensate for washing at lower temperatures, try using a Cotton (most agitation) or Synthetic cycle, if the garment care label allows. There are also detergents specially designed to work in cold water.

Sun savings

Whenever possible, dry your clothes outside on a line; you could see significant energy savings.

Don't scratch

Make sure to close all zippers, fasteners, and hooks to prevent and reduce abrasion of fabric and consider placing delicate items into mesh laundry bags.

Be proactive

To pre-treat stains, apply undiluted laundry detergent directly onto stained areas. For best results, allow product to sit on stain for a few minutes, scrub product into stain, then wash.

Time your bleach

When adding chlorine bleach, always use the bleach dispenser on your washer to ensure that it is added at the right time in the wash cycle. If your machine does not have a dispenser, add chlorine bleach at the end of the wash cycle.

Temp on the tag

Check garment care labels for recommended wash temperature.

HE for HE

For all HE washers, make sure to use a low-sudsing HE detergent.

Measure detergents

Use the right amount of detergent. Follow package directions carefully. For heavily soiled and/or large loads, use more detergent.

Soap, then clothes

If you do not have a detergent dispenser on your machine, add the detergent while the washer fills with water, ensure the detergent has dissolved, then add the clothes.

Wash your washer

Keep your washing machine free of residues by running a monthly wash cycle with Tide Washing Machine Cleaner.

View all laundry tips

Related Content

Washing Machine Care

That big metal box has a lot going on inside. Here’s how to keep it running smooth.

Average rating
1 star 2 star 3 star 4 star 5 star

Find A Laundromat

Tide Tide Tide